51.2v 100Ah 5kWh Lithium battery pack
DERIY Wall Mounted 51.2V 100Ah 16S1P LiFePO4 Battery Storage
price:650usd
- Overview
- Recommended Products
Battery Pack specifications
Package | No. | Item | General Parameter | Remark | |
1 | Combination method | 16S1P | |||
2 | Rated Capacity | Typical | 100Ah | Standard discharge after Standard charge package | |
Minimum | 98Ah | ||||
3 | Factory Voltage | 51V-53.0V(40-60%) | Mean Operation Voltage | ||
4 | Voltage at end of Discharge | 41.6V | Discharge Cut-off Voltage | ||
5 | Charging Voltage | 53-58.4V | |||
6 | Internal Impedance | ≤20mΩ | Internal resistance measured at DC after 50% charge | ||
7 | Standard charge | Constant Current 20A(0.2C) Constant Voltage see No.5 0.02CA cut-off | Charge time : Approx 5 h | ||
8 | Standard discharge | Constant current:50A end voltage see NO.4 | |||
9 | Maximum Continuous Charge Current | 100A | ≥10ºC | ||
10 | Maximum Continuous Discharge Current | 100A | ≥10ºC | ||
11 | Operation Temperature Range | Charge: 0~45℃ | 60±25%R.H. Bare Cell | ||
Discharge: -20~55℃ | |||||
12 | Storage Temperature Range | Less than 12 months :-10~35℃ | 60±25%R.H. at the shipment state | ||
less than 3 months: -10~45℃ | |||||
Less than 7 day : -20~65℃ | |||||
13 | Dimensions | 660*450*190mm | Include Wall Mounted Bracket | ||
14 | Weight | Approx:51kg |
Appearance and structural dimensions
There shall be no such defect as scratch, bur and other mechanical scratch, and the connector
should be no rust dirt. The structure and dimensions see attached drawing of the battery.
The surface of the battery should be free of obvious scratches, burrs, and other mechanical scratches, and the exposed metal terminals should be free of rust and dirt.
See the external dimension diagram of the battery for the structural dimensions;
Model : Wall Mounted Type- White |
|||||
Length |
450mm |
Width Include Mounted Bracket |
190mm |
Height |
660mm |
Wall Mounted Bracket Height |
30mm |
Terminal Height |
16mm |
Terminal type |
M8 |
Screen |
Size:3.2inch (100*60mm included frame) |
Case Structure of Battery Pack
No. |
Description |
Silk-screen |
Remark |
1 |
Switch LED |
|
Switch indicator |
2 |
Reset |
RST |
For reset the battery |
3 |
LED |
RUN |
Operation indicator |
4 |
LED |
ALM |
Alarm indicator |
5 |
Dial switch |
ADD |
Set the address |
6 |
LED |
SOC |
Capacity indicator |
7 |
LED |
Link |
|
8 |
DRY port |
DRY |
|
9 |
RS485 port |
RS485/CAN |
RS485 communication |
10 |
CAN port |
CAN |
CAN communication |
11 |
RS232 port |
RS232 |
RS232 communication |
12 |
RS485 port |
RS485 |
RS485 communication |
13 |
Air Switch |
|
Fuses |
14 |
LCD Screen |
|
|
15 |
Switch |
ON/OFF |
|
16 |
Input/Output |
P- |
Input/Output terminal |
17 |
Input/Output |
P+ |
Input/Output terminal |